Benemetal Material Technology Co.,Ltd
Quality First, Customer First
Add to Cart
2-flute flattened end mills with straight shank general milling
Wide applicaiton: suitable for Side face, Step shoulder, Straight slot, especially very suitable for slot milling
Mainly suitable for Carbon steel, Alloy steel, Cast iron, Nodular cast iron, pre-hardened steel, Hardened steel 40HRC, 50HRC, 55HRC, also suitable for Stainless steel, Titanium alloy, Heat resistant alloy
Number of teeth: 2 flute
With excellent wear resistance and toughness, high wear resistance and breakage resistance is achieved even during high performance milling, long working life
Compared with other manufaturer, our endmills has better breakage resistance
| Our popular specification: | |
| Ф1×Ф4×50×4T | Ф4×11×50×4T |
| Ф1.5×Ф4×50×4T | Ф6×16×50×4T |
| Ф2×50×Ф4×4T | Ф8×20×60×4T |
| Ф3×8×50×Ф4×4T | Ф10×25×75×4T |
| Ф4×11×50×4T | Ф6×16×50×2T |
| Ф5×13×50×Ф6×4T | Ф8×20×60×2T |
| Ф6×16×50×4T | Ф10×25×75×2T |
| Ф8×20×60×4T | Ф12×30×75×2T |
| Ф10×25×75×4T | Ф0.3×50×Ф4×2T |
| Ф12×30×75×4T | Ф0.5×1×50×Ф4×2T |
| Ф14×40×100×4T | Ф0.7×1.4×50×Ф4×2T |
| Ф16×45×100×4T | Ф0.8×1.8×50×Ф4×2T |
| Ф20×45×100×4T | Ф0.9×50×Ф4×2T |
| Ф4×15×75×Ф6×4T | Ф1×3×50×Ф6×2T |
| Ф4×15×75×4T | Ф1.2×50×Ф4×2T |
| Ф6×20×75×4T | Ф2×50×Ф4×2T |
| Ф8×25×75×4T | Ф2×8×50×Ф6×2T |
| Ф8×25×100×4T | Ф3×6×50×Ф6×2T |
| Ф10×30×100×4T | Ф4×11×50×Ф6×2T |
| Ф12×35×100×4T | Ф6×18×50×6T |
| Ф6×16×50×4T | Ф10×30×75×6T |
| Ф10×25×75×4T | Ф10×30×100×6T |