Benemetal Material Technology Co.,Ltd
Quality First, Customer First
Add to Cart
High Performance Carbide Milling Inserts Good Abrasion Resistance And Toughness
Carbide insert
1.Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking.
2.Most modern face mills use carbide inserts,as well as many lathe tools and endmills.In recent decades,though solid-carbide endmills have also become more commonly used,wherever the application's characteristics make the pros(such as shorter cycle times)outweigh the cons(mentioned above).
The Key products we selling as below:
--Carbide Inserts:turning inserts,threading inserts, milling inserts,grooving inserts..
--Turning Tool:external turning,boring bar turning, threading turning...
--End Mills: Carbide,, Rough End Mills, Round Tool Bits
--Milling Tool:high feedrate face mill, round dowel face mill, end mill shank..
--Drill bits:solid carbide step drills, twist drill, hss drill, indexable high speed drill
--Hand Taps&Carbide saw blade
--Rotating tool system:JT/BT/ST/HSK/DAT
Features:
1. Large production and reliable after service
2. Best technical assistance
3. High hardness, High efficiency, high stability
4. Professional inspection and high precision
5. High precision, easy replacement, general use
6. Moderate price, good quality, short delivery time
7. Support OEM service
| Grade | Coated | Application |
| YBC151 | CVD | P05-P20, finishing of P-type material |
| YBC152 | CVD | P05-P20, finishing of P-type material |
| YBC251 | CVD | P10-P30, semi-finishing of P-type material |
| YBC252 | CVD | P10-P35, semi-finishing of P-type material |
| YBC351 | CVD | P20-P40, roughing of P-type material |
| YBM151 | CVD | M05-M30, finishing, semi-finishing and roughing of M-type material |
| YBM153 | CVD | BEST CHOICE for Roughing of M-type material |
| YBM251 | CVD | M10-M30, semi-finishing and roughing of M-type material |
| YBM253 | CVD | M10-M35, semi-finishing and roughing of M-type material |
| YBD052 | CVD | K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron |
| YBD102 | CVD | K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron |
| YBD151 | CVD | K05-K25, finishing of K-type material, semi-finishing of K-type material |
| YBD152 | CVD | K05-K25, finishing and semi-finishing of K-type material |
| YBD252 | CVD | K15-K35, semi-finishing and roughing of K-type material |
| YBG102 | PVD | K01-K10, S10-S20, finishing of K.S-type material |
| YBG105 | PVD | finishing and semi-finishing for materials difficult to cut |
| YBG202 | PVD | P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material |
| YBG205 | PVD | M05-M30, semi-finishing and roughing of M-type material |
| YBG302 | PVD | P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material |
| YNG151 | Uncoated Cermet | P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material |
| YNG151C | Coated Cermet | P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material |
| YC10 | Cemented | P05-P20, finishing of P-type material |
| YC40 | Cemented | P20-P40, rouging of P-type material |
| YD051 | Cemented | K05-K15, finishing of K-type material |
| YD101 | Cemented | N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material |
| YD201 | Cemented | K10-K35, semi-finishing and rouging of K-type material |
ADVANTAGES of SHIELD
