Benemetal Material Technology Co.,Ltd
Quality First, Customer First
Add to Cart
Tungsten Carbide Aluminum Inserts TCGT Uncoated Carbide Turning inserts TCGT16T308
Feature Advantage:
Greatly reduced tool inventory specifications and tool change times during machining.
Comprehensive consideration of various factors, a variety of chip-breaker design, a reasonable combination of a variety of ideal coatings, the insert in the low carbon steel, die steel, high alloy steel, high hardness steel, stainless steel and other materials have excellent performance .
Carbide insert
1.Carbide is more expensive per unit than other typical tool materials, and it is more brittle, making it susceptible to chipping and breaking.
2.Most modern face mills use carbide inserts,as well as many lathe tools and endmills.In recent decades,though solid-carbide endmills have also become more commonly used,wherever the application's characteristics make the pros(such as shorter cycle times)outweigh the cons(mentioned above).
GRADE TABLE
| Grade | Coated | Application |
| YBC151 | CVD | P05-P20, finishing of P-type material |
| YBC152 | CVD | P05-P20, finishing of P-type material |
| YBC251 | CVD | P10-P30, semi-finishing of P-type material |
| YBC252 | CVD | P10-P35, semi-finishing of P-type material |
| YBC351 | CVD | P20-P40, roughing of P-type material |
| YBM151 | CVD | M05-M30, finishing, semi-finishing and roughing of M-type material |
| YBM153 | CVD | BEST CHOICE for Roughing of M-type material |
| YBM251 | CVD | M10-M30, semi-finishing and roughing of M-type material |
| YBM253 | CVD | M10-M35, semi-finishing and roughing of M-type material |
| YBD052 | CVD | K05-K15, finishing of K-type material, esp. for high speed dry machining of gray cast iron |
| YBD102 | CVD | K05-K20, finishing of K-type material, esp. for high speed machining of Nodular cast iron |
| YBD151 | CVD | K05-K25, finishing of K-type material, semi-finishing of K-type material |
| YBD152 | CVD | K05-K25, finishing and semi-finishing of K-type material |
| YBD252 | CVD | K15-K35, semi-finishing and roughing of K-type material |
| YBG102 | PVD | K01-K10, S10-S20, finishing of K.S-type material |
| YBG105 | PVD | finishing and semi-finishing for materials difficult to cut |
| YBG202 | PVD | P10-P30, M10-M30, K10-K20, S20-S30, semi-finishing of P, M, K-type material; Roughing of S-type material |
| YBG205 | PVD | M05-M30, semi-finishing and roughing of M-type material |
| YBG302 | PVD | P10-P40, M10-M30, K20-K40, S20-S30, semi-finishing and roughing of P.M.K.S-type material |
| YNG151 | Uncoated Cermet | P05-P20, M05-M20, K05-K20, wide application in finish machining of P. M. K-type material |
| YNG151C | Coated Cermet | P01-P20, M01-M20, K01-K20, wide application in finish machining of P. M. K-type material |
| YC10 | Cemented | P05-P20, finishing of P-type material |
| YC40 | Cemented | P20-P40, rouging of P-type material |
| YD051 | Cemented | K05-K15, finishing of K-type material |
| YD101 | Cemented | N05-N30, S05-S15, finishing and semi-finishing of H-type material, finishing of S-type material |
| YD201 | Cemented | K10-K35, semi-finishing and rouging of K-type material |
Technology:
1. Incorporate latest molding, coating, edge preparation,and other manufacturing technology.
2. Coatings provide highpeed capability and are engineered from finishing to hevy roughing,the ostcoat treatment reduces coating stresses,improves coating adhesion,and improves workpiece finish.
3. Application areas: Machining of cast iron, nonferrous alloy, chill cast iron, hard steel, stainless steeland other non-metallic.
